2023 AGM Chair and CEO Address
Released
Released
Announcement PDF
ASX Announcement | 31 October 2023
Amaero International Limited (ASX:3DA)
2023 Chairman and CEO Address
Annual General Meeting
Address by Chairman and CEO, Mr Hank J Holland
The past 100+ days have seen Amaero turn the page on “what was” … and have seen Amaero complete its restructuring and embrace a promising new chapter.
With a “can do,” pro business and pro economic growth attitude, stakeholders in Tennessee quickly mobilized
support and proposed a package that included a “nearing completion” 9,300 square meter manufacturing
facility, economic incentives, long-term subsidized electricity rates and a collaboration with the U.S.’ premier
national defense laboratory.
One year ago on the 1st of November 2022, Amaero lodged an ASX announcement that Pegasus Growth
Capital would sub-underwrite a $10.5 Entitlement Offer and that I would assume the role of Chairman and Chief
Executive Officer. We embarked on an intensive period of corporate re-structuring, we explored numerous
opportunities, we re-set the strategic direction… and, in July, we announced that we would re-locate Amaero’s
manufacturing, applied research & development and corporate headquarters to Tennessee.
Over the past year, Amaero’s stock price has risen by approximately 180%. During the same period the ASX
200 is flat and the ASX Small Ordinary index has lost about 7%.
After decades of celebrated globalization and the migration abroad of most manufacturing capabilities, the
COVID epidemic followed by the conflict in Ukraine exposed the resulting vulnerability to national security and to
economic resiliency. With bi party support, the U.S. has shaped a national policy response with the strategic
imperative of re-shoring critical and strategic manufacturing and defence production capabilities, as well as
securing resilient and scalable supply chains. Given the rise in geopolitical tensions, there is a heightened
sense of urgency to invest in defence capabilities and to re-establish a dominant leadership in primacy
capabilities, such as hypersonics.
Amaero was very fortunate to identify a modern, purpose built manufacturing facility that was “nearing
completion.” The 9,300 square meter facility has been completed and construction of fit out will begin this
quarter. Securing a new facility and negating the need to build a facility saved 12+ months on our timeline to
commission equipment and to commence powder production. And, we have estimated that working capital is
reduced by approximately $22 million.
The first atomiser has been delivered to the U.S. and is in storage awaiting installation. As announced, we
expect installation to commence in the 2nd quarter CY2024 and that powder production will commence in the 4th
quarter CY2024.
Tennessee has proven to be business-friendly and they welcomed our sense of urgency. I would like to
personally thank Governor Bill Lee, Stuart McWhorter, the Governor’s Commissioner of Economic
Development, United States Senator Bill Hagerty and US Congressman Chuck Fleischman. Their advocacy
and support have positioned Tennessee at the center of the manufacturing renaissance in the U.S.
I would also like acknowledge the Tennessee Valley Authority. The TVA and local utilities have invested heavily
in electricity infrastructure to meet the demands of industry today and into the future. By way of example, 140
megawatts of capacity have been installed at a dedicated substation for the Spring Branch Industrial Park where
Amaero’s facility is located. Moreover, we have signed a 10-year contract with subsidized electricity rates of
approximately $0.055 per kilowatt hour.
Finally, we are excited about the opportunity to collaborate with Oak Ridge National Laboratory, the premier
national defence laboratory.
I would argue that the most significant accomplishment over the past 12 months culminated in July and August
with the hiring of Eric Bono, Chris Scanlon, Jay Chandran, Fred Yolton and David Schmidt. We have amongst
the strongest and most experienced team in the industry with deep experience in powder metallurgy and
additive manufacturing. Ken Davis will be instrumental in working with Eric and the team to liason with our
customers and to position Amaero as a valued partner and supplier of choice.
Not since Sputnik in 1957, has the United States ceded a primacy capability to another superpower. Though
the U.S. first developed hypersonics, China and Russia surpassed the capabilities and commercialized
hypersonic missile technology. The U.S. is racing to commercialize hypersonic platforms such as the
hypersonic scramjet missile. At mach-20 and with advanced propulsion systems, the hypersonic applications
demand advanced materials such as C-103 and refractory alloys. Further, the component’s complex geometry
and integrated cooling channels are well-suited (in some cases uniquely suited ) for 3D printing.
To the extent that you listen to an earnings call of a defence prime contractor such as Lochkeed Martin,
Northrop Grumman or RTX, you will invariably hear executives touting their hypersonic developments and the
promise of large contracts for next generation weaponry programs. At the same time, leadership at Department
of Defense and the Air Force will highlight the woeful vulnerability in the supply chain for critical advanced
materials such as C-103. See quote from a supply chain study that was commissioned in May 2023 by the U.S.
Air & Space Force.
Following our discussions with the leading defence research labs and indications of demand from prime defence
contractors and 1st tier suppliers, Amaero announced that we would dedicate the production of the 1st atomiser
to C-103. As the demand for C-103 ramps, we will utilize excess production capacity to produce high-value
specialty alloy powders that will be utilized in the next generation defence systems.
Amaero is uniquely positioned to be the supplier of choice for C-103 and high-value specialty alloy powders.
First, given the high melting temperature (as an example Ti64 has a melting temperature of 1,600 degrees
celcius… whereas C-103 has a melting temperature that’s 50% higher at 2,350 degrees celcius), many of the
atomization systems can’t operate at the higher temperature. Second, many of the larger powder producers
have long production cycles and are not well suited for smaller batch production runs. Lastly, atomization and
powder production is the core of Amaero… this is the essence of who we are and what we do. For many of the
material companies who produce powder, it may be 5% or less of their revenue… it’s not core to their business.
The U.S. Department of Defense has identified castings and forgings supply chain as one of the four most
pressing threats to national security. The critical shortage of forging capacity in the U.S. and allied countries
has resulted in untenably long lead times for parts resulting in a large percentage of military assets that are out
of service. As an example, its estimated that more than 10% of F-35s are grounded awaiting service and
refurbishment.
Before I turn to Eric Bono… we gathered the technical team in Tennessee about a month ago to finalize the
engineering and the design of fit out for the facility. We have a brief video to introduce other members of the
Amaero team and to show you the facility that will be home to the manufacturing, applied research &
development and corporate headquarters for Amaero. With that, it’s my pleasure to introduce Amaero’s
President and Chief Technical Officer, Eric Bono.
Mr Eric Bono, President and Chief Technical Officer to present.
Thank you, Eric.
2024 will be a hallmark year for Amaero. We will fanatically focus on execution and on delivering the important
milestones. I’m confident that over the next year, the broader market will come to better understand and to
better value Amaero’s differentiated capabilities and the large market opportunity.
For further information, please contact:
Amaero International Limited (ASX:3DA)
Media & Investor Enquiries
Hank J. Holland
The Capital Network
Chairman and CEO
Julia Maguire
hank.holland@amaeroinc.com
+61 2 8999 3699
julia@thecapitalnetwork.com.au
About Amaero International Limited (ASX:3DA)
Amaero International Limited is an ASX-listed company focused on titanium, refractory and
speciality alloy powder production, as well as advanced manufacturing applications that utilise
alloy powder for aerospace & defence, space, medical and other industries.
For further information, please visit: https://www.amaero.com.au/
For more information
Follow us on X
Subscribe on our YouTube
Follow us on LinkedIn
Subscribe to our mailing list to receive updates
Visit our investor website: https://www.amaero.com.au/
This ASX announcement has been authorised by the Board of Amaero International Limited (ASX:3DA)
Share your feedback
Discover